Curved Conveyor Tube
Jump to navigation
Jump to search
Curved Conveyor Tube | |
---|---|
Category: | Storage |
Function: | Part of the conveyor system for transferring items |
Fits small grid | |
Mass: | 365 kg |
PCU: | 10 |
Size: | 3x3x3 |
Time to Build: | 6 sec |
Fits large grid | |
Mass: | 394 kg |
PCU: | 10 |
Size: | 1x1x1 |
Time to Build: | 7 sec |
Data Controls: | [edit] [purge] (?) |
The Curved Conveyor Tube is a part of the conveyor system.
Usage
The Curved Conveyor Tube is used alongside several similar blocks to link inventories on a ship or station into a network. Once established, the conveyor network allows items to be easily transferred between blocks and will automatically move items as needed.
- For more information on how to use conveyors, see Conveyor system.
Power
From release 1.196 on, power requirements of the conveyor system are not progressive based on length of lines anymore, but are constant 1W.
Construction
The Curved Conveyor Tubehas mount points only on two adjacent side with conveyor ports. It forms a sort of elbow pipe, allowing bends in the conveyor system without requiring a full Conveyor Junction block.
Recipe
Curved Conveyor Tube | ||||
---|---|---|---|---|
Component | Large Ship/Station Required | Large Ship/Station Optional | Small Ship Required | Small Ship Optional |
Small Steel Tube | 12 | — | 10 | — |
Motor | 6 | — | 6 | — |
Interior Plate | 10 | 4 | 2 | 5 |
Construction Comp. | 20 | — | 20 | — |