Conveyor Frame

From Space Engineers Wiki
Jump to navigation Jump to search
Conveyor Frame
Icon Block Conveyor Frame.png

Category: Storage
Function: bridges gaps in small-grid conveyor systems

Fits small grid
Mass: 179 kg
Power: -0.00004 MW
PCU: 10
Size: 1x3x3
Time to Build: 4 sec

Data Controls: [edit] [purge] (?)

The Icon Block Conveyor Frame.png Conveyor Frame is a conveyor block in Space Engineers. The Conveyor Frame is used alongside several similar blocks to link inventories on a small-grid ship or station into a network. Once established, the conveyor network allows items to be easily transferred between blocks and will automatically move items as needed.

Usage

The purpose of this frame is to provide more flexibility in the design of large conveyor systems on small-grid ships. Since Collectors, Welders, Grinders, and other small-grid blocks using large ports are usually multiples of 3x3x3, this would mean that a small ship would need to fit to these dimensions, even though their strength is their compact 1x1x1 layouts.

Other than the shape and size of the conveyor frame, it functions the same as a Conveyor Tube.

For detailed information on conveyor networks and their two port sizes, see Conveyor system.

Power

The Conveyor Frame requires 40 W of power to operate. If unpowered, it will not be able to transport items. However it will not draw power unless there is an inventory or full conveyor block on both sides of the tube.

Gallery

A conveyor frame
A conveyor frame inserted to extend a small-grid Connector sunk into a large-grid hangar deck to match up with a small-grid ship's docking Connector
Between the two Collectors (two yellow squares) that are three blocks deep, the Conveyor Frame helps connect the 2-blocks deep O2/H2 Generator to the conveyor system.
A custom turret with small-grid block weapons on a large-grid hinge and rotor on a station. Conveyor Frame "spacer" visible below the Connector.

Construction

Thanks to Frames, large conveyor ports are not fixed to be spaced 3x3x3 blocks apart. Conveyor Frames are basically 1x3x3 sized conveyor tubes which help you bridge gaps that are one or two small blocks wide.

The block is not available for large grid (and also would not make sense there).

Recipe

Icon Block Conveyor Frame.png Conveyor Frame
ComponentLarge Ship/Station
Required
Large Ship/Station
Optional
Small Ship
Required
Small Ship
Optional
Icon Item Small Steel Tube.png Small Steel Tube5
Icon Item Motor.png Motor2
Icon Item Interior Plate.png Interior Plate41
Icon Item Construction Comp..png Construction Comp.12


Functional Blocks