Exhaust Pipe

From Space Engineers Wiki
Jump to navigation Jump to search
Exhaust Pipe
Icon Block Exhaust Pipe.png

Category: Decorative
Fits small grid
Mass: 104 kg
Power: 0.0002 MW
PCU: 50
Size: 1x1x1
Time to Build: 8 sec

Fits large grid
Mass: 526 kg
Power: 0.0002 MW
PCU: 50
Size: 1x1x1
Time to Build: 14 sec

Data Controls: [edit] [purge] (?)

The Exhaust Pipe is a decorative block that is basically a configurable particle emitter. Only players who have purchased the Wasteland Pack DLC can build it, but other players can use it after it has been built and shared with them.

Usage

Add this block to grids to have them emit particle effects. Usage examples include:

  • steampunk vehicles, trucks, or heavy utility vehicles...
  • roaring race cars or speederbikes...
  • industrial bases with smoke stacks or sparking "warp cores" in engine rooms...
  • fake burning wrecks or cosy camp fires...
  • highlighting coordinated Automaton swarms...

How to set an effect

Open the Control Panel Screen to configure the Exhaust Pipe to emit the following particles:

  • electric arc - looks like a Tesla coil
  • car smoke - subtle smoke
  • fire - looks like a flame thrower
  • fire and smoke - flickers like a campfire
  • smoke - dark sooty smoke
  • smoke electric - with added sparks
  • smoke reactor - with added green radiation
  • smoke white - looks like “clean” steam

Each effect exists in a standard and a small size.

Like other lights in game, the effects are sometimes visible through walls.

How to make effects depend on power use

You can make the intensity of the effect depend on the power use of the vehicle. The more power your vehicle uses, the more visible the effect becomes, which looks impressive on accelerating race cars, or refineries processing ores in smaller and larger chunks.

  • Set Power Dependency to 100% to make the effect fully reflect current energy usage.
    • The effect disappears when the vehicle is stationary.
    • The effect becomes fully visible when at top speeds.
  • Set Power Dependency to a medium percentage, to make the effect always visible while driving and less dependent on the grid’s actual power usage.
  • Set Power Dependency to 0% for constant, stationary effects, such as camp fires or smoldering wrecks.

Gallery

Construction

The Exhaust Pipe can be built on small and large grids. It uses a negligible amount of power. It’s 1x1x1 blocks large and can only attach to other blocks on the underside.

Recipe

Icon Block Exhaust Pipe.png Exhaust Pipe
ComponentLarge Ship/Station
Required
Large Ship/Station
Optional
Small Ship
Required
Small Ship
Optional
Icon Item Steel Plate.png Steel Plate51011
Icon Item Small Steel Tube.png Small Steel Tube2
Icon Item Motor.png Motor42
Icon Item Large Steel Tube.png Large Steel Tube2
Icon Item Construction Comp..png Construction Comp.101