Ladder Shaft

From Space Engineers Wiki
Jump to navigation Jump to search
Ladder Shaft
Icon Block Ladder Shaft.png

Function: The ladder enables you to traverse vertical spaces. ...
DLC? Vanilla

Fits large grid
Mass: 760 kg
Hitpoints: 3150
PCU: Unknown
Size: 1x1x1
Time to Build: 12 sec

Data Controls: [purge] (?))

The Ladder Shaft is a large grid block that has the same function as a Icon Block Ladder.png Ladder and the same size and appearance as a Icon Block Passage.png Passage block.

Usage

To use it as a ladder:

  1. LMB-click it (or face it and press F key.
  2. Press W to go up or press S to go down.
  3. Facing forward, pay attention to the arrows printed on the back wall: They show you whether you are in the upper or lower half of the block.
  4. Press F key again to let go.
    • If you let go in the upper half, you land on that floor.
    • If you let go in the lower half, you'll land one floor below.

Gallery

Construction

The Ladder Shaft can be built on large-grids only and it has mount points on all sides.

Recipe

Icon Block Ladder Shaft.png Ladder Shaft
ComponentLarge Ship/Station
Required
Large Ship/Station
Optional
Small Ship
Required
Small Ship
Optional
Icon Item Small Steel Tube.png Small Steel Tube50
Icon Item Interior Plate.png Interior Plate80
Icon Item Construction Comp..png Construction Comp.3010
Decorative Blocks