Conveyor Cap
(Redirected from Conveyor Pipe Cap)
Jump to navigation
Jump to search
| Conveyor Cap | |
|---|---|
| |
| Category: | Decorative |
| Function: | a decorative lid for ports |
| Fits small grid | |
| Mass: | 22 kg |
| PCU: | 1 |
| Size: | 1x1x1 |
| Time to Build: | 4 sec |
| Fits large grid | |
| Mass: | 110 kg |
| PCU: | 1 |
| Size: | 1x1x1 |
| Time to Build: | 10 sec |
| Data Controls: | [edit] [purge] (?) |
Conveyor Cap is a decorative block in Space Engineers. This vanilla block has the same function as the Conveyor Pipe Cap that you can build only if you have purchased the Heavy Industry Pack DLC.
Usage
This lid-shaped block is flat and rectangular and commonly used to hide a conveyor port, or you can use it to decorate any other wall or floor block. The Conveyor Pipe Cap DLC variant is the same but round.
Gallery
Conveyor Cap
Conveyor Cap Medium
Conveyor Pipe Cap
Construction
It exists for large and small grid and has only one mount point on the backside.
Recipe
 Conveyor Cap | ||||
|---|---|---|---|---|
| Component | Large Ship/Station Required | Large Ship/Station Optional | Small Ship Required | Small Ship Optional |
 Interior Plate | 5 | 5 | 1 | 1 |
 Construction Comp. | 10 | — | 2 | — |
 Conveyor Cap Medium | ||||
|---|---|---|---|---|
| Component | Large Ship/Station Required | Large Ship/Station Optional | Small Ship Required | Small Ship Optional |
| Interior Plate | — | — | 5 | 5 |
| Construction Comp. | — | — | 10 | — |
 Conveyor Pipe Cap | ||||
|---|---|---|---|---|
| Component | Large Ship/Station Required | Large Ship/Station Optional | Small Ship Required | Small Ship Optional |
| Interior Plate | 5 | 5 | — | — |
| Construction Comp. | 10 | — | — | — |
