ResourceStorageComponent Definition

HomeModdingReferenceSBCEntityCompsResourceStorageComp.Def

Overview

Inherits

• ComponentDefinitionBase
• DefinitionBase

Requires an xsi:type attribute:

<EntityComponent xsi:type="MyObjectBuilder_ResourceStorageComponentDefinition">

This is part of an entity component, see EntityComponents for usage details.

Elements

 ↑   🔗 

StoredResourceId <StoredResourceId>	Type: SerializableDefinitionId	Default: (invalid)
Type and subtype of a resource (GasProperties.sbc) to store. Type has to be GasProperties as it's the only kind that is a resource. Example: <ConsumedResourceId Type="GasProperties" Subtype="Water" />
Capacity <Capacity>	Type: Single	Default: 1000
Liters of <StoredResourceId> to store.
ResourceSinkGroup <ResourceSinkGroup>	Type: String	Default: null
SubtypeId of a sink resource group.
ResourceSourceGroup <ResourceSourceGroup>	Type: String	Default: null
SubtypeId of a source resource group.
LeakPercent <LeakPercent>	Type: Single	Default: 1
If the block is unfinished, unpowered or turned off, the stored resource will be lost by this ratio (for example 0.2 would be 20% of total capacity) every roughly 1.66s. Roughly 1.66s (every 100 ticks) refers to the inaccuracy of Update100. This update is distributed to avoid running all entities in the same tick which would cause hitching, instead only a few run each tick (entities / 100). However, an entity registering or unregistering itself to this update can cause other entities' update to run earlier or later than expected. This means there might be random variance to the frequency of this function, how much depends on what else is happening in the world.
LowerLimitRatio <LowerLimitRatio>	Type: Single	Default: 0.5
Starts requesting the resource if filled ratio (where 1.0 is 100%) is lower than this.
UpperLimitRatio <UpperLimitRatio>	Type: Single	Default: 0.9
Stops requesting the resource if filled ratio (where 1.0 is 100%) is higher than this.

(Top) | From ComponentDefinitionBase:

(Nothing)
(Top) | From DefinitionBase:

Common

 ↑   🔗 

Id <Id>	Type: SerializableDefinitionId	Default: (invalid)
The type and subtype combined make up a unique identifier for this definition. If two definitions use the same Type+Subtype (Subtypes are only unique per Type), then the last to load will override the first one(s). For more details see Things to know about SBC. TypeId <TypeId> Type: string Default: (invalid) Must be an existing type with or without the "MyObjectBuilder_" prefix. Some types require an xsi:type, refer to the vanilla files for the exact pairing. TypeId vs xsi:type SubtypeId <SubtypeId> Type: string Default: (empty) This can be invented and only needs to be unique per TypeId. Vanilla game re-uses some subtypes over multiple types (e.g. Iron is used for Ore type and Ingot type). An empty value is also a valid subtype (which vanilla also uses on at least 5 blocks). Type Type (attribute) Type: string Default: (invalid) Same behavior as <TypeId>, do not define both. Subtype Subtype (attribute) Type: string Default: (empty) Same behavior as <SubtypeId>, do not define both. Example: <Id> <TypeId>CubeBlock</TypeId> <SubtypeId>FancyTable</SubtypeId> </Id> Because it has attribute alternatives it can also be declared as: <Id Type="CubeBlock" Subtype="FancyTable" />
DisplayName <DisplayName>	Type: String	Default: null
If the object defined here is visible anywhere in the game GUI, this would be the name shown for it. In cases where it is used, it is very much required. Can be plain-text. If the text contains DisplayName_ then: A localization key (from .resx files) will be searched for. It will scan for text variables to replace.
Description <Description>	Type: String	Default: null
Optional. If the object defined here is shown with a description in the game GUI (Hotbar/G-menu, HUD, etc) then this is the place to write it. Can be plain-text. If the text contains Description_ then: A localization key (from .resx files) will be searched for. It will scan for text variables to replace. If the final text (plain, localized or variable-replaced) contains {0}, {1}, etc, then they will replaced by kb&m control binds defined in <DescriptionArgs>.
DescriptionArgs <DescriptionArgs>	Type: String	Default: null
Optional. A comma-separated list of control IDs which are referenced in <Description> by {number} tags, which then get replaced by the keyboard or mouse bind that the viewer has for those controls. Example: <Description>Press {0} to fire, {1} to change color, {2} to interact.</description> <DescriptionArgs>PRIMARY_TOOL_ACTION,CUBE_COLOR_CHANGE,USE</DescriptionArgs> And each player will see their current binds for those actions. The control IDs can be found in your %appdata%/SpaceEngineers/SpaceEngineers.cfg at the ControlsButtons section.
Icon <Icon>	Type: String[]	Default: null
Icon(s) for the definition which may or may not be used depending on the definition type. Path to a .dds or .png file relative to current mod's folder. Falls back to game folder if not found in current mod. Referencing assets in other mods Can be declared multiple times which will stack icons on top of eachother, however it will not work for all definitions. Known definitions to work or not work with multiple icons Working: Blocks, BlockVariantGroups and component items seen in G-menu, BlockInfo (HUD right side) and toolbars; Blueprints in terminal production tab; Blocks and PhysicalItems in gamepad HUD. Partial: Blocks seen in terminal. Not working: HandItems (uses PhysicalItem's icon instead); Blocks and BlockVariantGroups seen in build planner, radial menu and some economy GUIs; PhysicalItems in economy GUIs and stores; Prefabs in stores; BlueprintClass (tabs) in terminal production tab; BankingSystemDefinition (Game\BankingSystem.sbc); Emotes (both kinds of definitions) in gamepad HUD; Block skins; RespawnShips. Special cases: Economy contracts, FactionIcons Definition.
DLC <DLC>	Type: String[]	Default: null
Optional. The DLC subtypeId that this definition will require. For the IDs, refer to <SE>\Content\Data\Game\DLCs.sbc. Can be declared multiple times to require multiple DLCs. Most definition types won't check for this, the ones that do: blocks, emotes and possibly anything else that can be placed in the toolbar.
AvailableInSurvival <AvailableInSurvival>	Type: Boolean	Default: true
Depends on the definition if it uses this, and if it does then this determines whether it can be accessible in survival game mode. Currently known definitions that do use this: Blocks, BlockVariantGroups, BlockCategories and any definition that can show up in a toolbar. EntityStatComponent Definition and EntityStat Definition.
Public <Public>	Type: Boolean	Default: true
If the definition is visible or accessible in some cases. For blocks, this only hides them and they can still be built using projectors and other means.
Enabled Enabled (attribute)	Type: Boolean	Default: true
If set to false it will remove the definition after it's been loaded. Example usage: <Definition Enabled="false"> The "Definition" above is the opening element that for the entire definition, not an inner node like <DisplayName> is. The opening node can have a different name for other definitions, some examples <Component>, <Blueprint>, etc.
xsi:type xsi:type (attribute)	Type: string	Default: null
Name of an object that this definition will be deserialized as. Sometimes required, depends on the definition. The wiki page for any given definition will mention at the top what xsi:type it requires, if any. The game's sbc files are also a reference on what xsi:types are required for a given definition. This attribute is available on all elements and comes from the XML specification. This game relies on this attribute to change which sub-definition object is used to deserialize that element's contents. It's what allows, for example, a thruster to have unique elements (such as <MinPlanetaryInfluence>) that no other block definitions have. For more details on how this relates to the TypeId, and usage examples, see: Things to know about SBC - TypeId vs xsi:type.

---